Hydraulic Gear Pumps

Hydraulic Gear Pumps in this category are available in a range of different displacements, with either aluminium or cast iron end plates as well as different rotations. High pressure Aluminium Gear Pumps in two group sizes can be fitted to the central hydraulic power pack manifold. Both gear pump types are pressure compensated type with balancing internal bushes, which gives high volumetric efficiency. The versatility of our  Gear Pumps permits the assembling of a multiple pump using a single pump and making only a simply operation of disassembly / asembly. All our standard Gear Pumps are already present to engage another pump. A very limited quantity of kit "flange connections and accessories" gives a small stock value and mainly a rapid assistance to final users. Select the Gear Pumps which you require and then select the joining kit from the multiple gear pump kits to build up your requirement.

CB-E Gear Pump

The CB-E Gear Pump is small in displacement. CB-E Gear Pump consists of a gear pair supported by two aluminum bearing blocks,a housing, front cover and rear cover. TheCB-E Gear Pump features small dimension, low weight, high mechanical and volumetric efficiency as well as low noise level. CB-E Gear Pump has been widely used in small hydraulic systems of middle/high pressure for a majority of applications.
1. Adopt high strength aluminum alloy body
2. High performance, low noise and long service life
3. Easy maintenance
4. Axial interval self compensation and radial balance bushings, anti-friction DU bearings
5. The products are widely used used in forklift trucks,cranes,bulldozers,loaders,excavators,road roller,hydraulic platforms,special trucks and other industries such as mine, harbor,metallurgical, light industry and agricultural industry etc.
Model:  CB-E0.26***
Displacement : 0.27 (0.0165)
Pressure (MPa): 16 ,18, 20
Speed (RPM): 3000
Dimension:  61.2
Efficiency:   82%

CBT-F2 Gear pump

CBT-F2 Gear pump is the dynamic component of the hydraulic system. CBT-F2 Gear pump features high accuracy gears, high strength aluminium shell, float bushings, and DU bearings. It has the characteristics of simple structure, light weight, high efficiency, low noise, and high reliability, etc. CBT-F2 Gear pump is widely used in the hydraulic system of truck, construction machinery, lift and transport machinery, mine machinery, and agriculture machinery, etc.
model: CBT-F2-1.1 GB*
Disp (Ml/r): 1.1
Rated Pressure: 20
Max Pressure: 20
Rated Speed: 2000
Max Speed: 6000
Min Speed:600
A(m m):74
G(m m):33

Hydraulic Gear Pump CBK1

The Hydraulic Gear Pump CBK1 has five options of inlet/outlet positions: rear in/front out, side in/rear out, rear in/side out, side in/side out, rear in/rear out. Both CW and CCW direction pumps are available.

Hydraulic Gear Pump CBK1-F * * * 

F=Rated pressure:20Mpa

*=Displacemant:0.63~8ml/r

*=inlet/outlet Position:  Omit:rear in/front out 

                                      A:side in/rear out  

                                      B:rear in/side out 

                                      C:side in/side out  

                                      D:rear in/rear out

*=Direction:  Omit:CW  F:CCW

 Hydraulic Gear Pump Model: CBK1-F0.63**      CBK1-F0.8**

 Hydraulic Gear Pump Displacement mL/r(in3/r): 0.63 (0.038)  0.89 (0.054)

 Hydraulic Gear Pump Rated (RPM):  2000

 Hydraulic Gear Pump Max (RPM):  4000

 Hydraulic Gear Pump L(mm):  75  76

 Hydraulic Gear Pump Efficiency: 85%

The Hydraulic Gear Pump CB-E

The Hydraulic Gear Pump CB-E consists of a gear pair supported by two aluminum bearing blocks, a housing, front cover and rear cover. The features of CB-E Gear pump have small dimension, low weight, high mechanical and volumetric efficiency as well as low noise level.  the Hydraulic Gear Pump CB-E has been widely used in small hydraulic systems of medium/high pressure for a majority of applications.　　
Notes: The Gear Pump CB-E  has four inlet/outlet positions: rear in/front out, side in/ front out, side in/side out, rear in/side out. Both CW and CCW direction pumps are available.

Hydraulic Gear Pump CB-E * * * *     

E=Rated pressure:16Mpa

*=Displacemant:0.26~1.5ml/r

*=Inlet Position and Size: Omite:Rear in G1/4/Front out  

                                          A:Rear in NPT1/4/Front out  

                                          B:Side in G1/4/Front out  

                                          C:Side in M10×1.5/Front out 

                                          D:Side in G1/4/Side out G1/4 

                                          E:Side in M10×1/Side out M10×1 

                                          F:Rear in G1/4/Side out G1/8 

                                          G:Side in Z1/8/Side out Z1/8 

                                          K:Front in /Front out 

                                          N:Rear in NPT3/8/Front out 

                                          R:Rear in G3/8/Front out

*=Direction:  F:CCW  Omit:CW

*=Shaft Option: Omit:Tang  P:Straight Key  WK:Woodruff Key

Hydraulic Gear Pump CB-E

Hydraulic Gear Pump CB-E * * * *     

E=Rated pressure:16Mpa

*=Displacemant:0.26~1.5ml/r

*=Inlet Position and Size: Omite:Rear in G1/4/Front out  

                                          A:Rear in NPT1/4/Front out  

                                          B:Side in G1/4/Front out  

                                          C:Side in M10×1.5/Front out 

                                          D:Side in G1/4/Side out G1/4 

                                          E:Side in M10×1/Side out M10×1 

                                          F:Rear in G1/4/Side out G1/8 

                                          G:Side in Z1/8/Side out Z1/8 

                                          K:Front in /Front out 

                                          N:Rear in NPT3/8/Front out 

                                          R:Rear in G3/8/Front out

*=Direction:  F:CCW  Omit:CW

*=Shaft Option: Omit:Tang  P:Straight Key  WK:Woodruff Key

　Small in displacement, the Gear Pump CB-E  consists of a gear pair supported by two aluminum bearing blocks, a housing, front cover and rear cover. The features of CB-E pump have small dimension, low weight, high mechanical and volumetric efficiency as well as low noise level. It has been widely used in small hydraulic systems of medium/high pressure for a majority of applications.　　

Notes: The Gear Pump CB-E  has four inlet/outlet positions: rear in/front out, side in/ front out, side in/side out, rear in/side out. Both CW and CCW direction pumps are available.